...

Exhibition News

YTL Presents Rigid Rogowski Coil Series at Enlit Europe 2026

By

11 November 2026 | Vienna, Austria

Zhejiang Yongtailong Electronic Co., Ltd. (YTL) has completed its technical presentation at Enlit Europe 2026, introducing its new rigid Rogowski coil series and sharing measurement test results for current-sensing and energy metering applications.

The session took place on 11 November at the Consumers & Flexible Demand Hub in Hall A, where YTL’s Tom Zhu presented the company’s work on rigid Rogowski coil technology under the theme “Rigid Rogowski Coil — Powering Modern Energy Metering.”

The presentation was part of Enlit Europe’s programme on high-current measurement challenges in commercial and industrial energy monitoring.

Introducing the R10S, R20S and R20C Series

Modern electrical systems are placing new demands on current measurement. Bidirectional power flows from solar PV and battery storage, changing load conditions associated with EV charging and power electronics, and growing numbers of measurement points all influence how current-sensing hardware is selected and integrated.

At Enlit Europe, YTL introduced three rigid Rogowski coil product series designed for different installation and current measurement requirements.

The R10S standard series features a split-core design, with 125 A, 300 A and 500 A options.

The R20S high-accuracy series also uses a split-core structure, with 200 A, 400 A and 600 A options.

The R20C high-accuracy series provides closed-core configurations covering 400 A, 600 A, 800 A, 1200 A and 2400 A.

Unlike conventional magnetic-core current transformers, Rogowski coils use an air-core sensing principle that avoids magnetic-core saturation. The rigid construction also provides a defined sensor geometry, supporting consistent positioning and practical integration into electrical measurement assemblies.

The selection between split-core and closed-core designs depends on conductor arrangement, installation access and the measurement requirements of the application.

Sharing Measurement Test Results

Beyond introducing the product series, YTL presented selected testing data to explain how rigid Rogowski coil performance is evaluated.

The technical presentation included sensor-level Class 0.2 test results under IEC 61869-10:2017 and a measured frequency-response assessment for a selected R20C 800 A test configuration.

For that configuration, the reported response closely followed the ideal reference curve across the 10 Hz to 80 kHz range under the specified test conditions.

YTL also presented Class 0.5 integrated metering test results for a specified energy-meter-plus-Rogowski-coil configuration, evaluated against IEC 62053-21:2020.

These findings highlight the distinction between current sensor performance and the accuracy of a complete energy metering arrangement.

While sensor design is fundamental, the final measurement result also depends on signal acquisition, processing, calibration and the characteristics of the selected meter.

Sensor-level accuracy should therefore not be treated as an automatic indication of complete metering-system accuracy. Performance needs to be verified for the intended hardware combination and operating conditions.

Connecting Current Sensing with Practical Metering Applications

The presentation also examined how current sensing fits into a broader measurement chain, from the sensing element and metering hardware to communication and data acquisition.

For electrical engineers, panel builders and system integrators, component selection involves more than comparing nominal current ratings or accuracy classes.

Mechanical installation, signal characteristics, measurement range, documentation and system-level testing all need consideration during technical evaluation.

YTL’s work on rigid Rogowski coil technology forms part of its ongoing development of current-sensing and energy metering hardware for modern electrical applications.

Continuing the Discussion at Enlit Europe 2026

YTL thanks the attendees who joined the technical session and the Enlit Europe organizers for the opportunity to share its engineering work.

The exhibition continues through 12 November 2026, with the YTL team available at Booth B.j70 in Vienna to discuss rigid Rogowski coil technology, energy metering products and application-specific measurement requirements.

Engineers, equipment manufacturers, panel builders, distributors and system integrators interested in evaluating current-sensing or metering hardware are welcome to contact YTL for further technical information.

Explore YTL’s Enlit Europe 2026 technical presentation:

http://www.ytl-e.com/enlit-2026/

Official Enlit Europe session information:

www.enlit.world/enlit-europe/session/c3053093-078c-4b8a-ab35-76d2433bc40b

Need a Smart Metering Solution for Your Project?

Tell us your requirements and our team will provide a professional solution and quotation within 24 hours.

Quick ResponseReply within 24 hours
Expert SupportEngineer-to-engineer
Custom SolutionsProject-ready from spec
Long-term PartnerSingle point of contact
Add Project Details (Optional)

Share technical or purchasing details to help us recommend the right model faster.

By submitting this form, you ask YTL to use your details to respond to your inquiry. Privacy Policy

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.