Wi-Fine Electricity Meter

Type

Pic

Functions

Wi-Fine Data Collector
J119022

● Parameter setting through RS485 communication
● Use Wi-Fine to communicate with energy meter, and communicate with system platform through GPRS
● Support remote upgrade
● DLMS/COSEM communication protocol

Single Phase Wi-Fine Din rail Electricity Meter

D11A028

● RS485(9600\19200\38400\115200 settable)   
● IR / Wi-Fine (115200)
● Protocol: Modbus/DLT645
● bi-directional Measurement
● 4 tariffs
● Tamper inputs
● Demand

Three Phase Wi-Fine Din rail Electricity Meter

D51A028

● RS485(9600\19200\38400\115200 settable)   
● IR / Wi-Fine (115200)
● Protocol: Modbus/DLT645
● bi-directional Measurement
● 4 tariffs
● Tamper inputs
● Demand

Single Phase STS Wi-Fine electricity meter  
D12A080

● Anti-tampering
● 8 Tariff
● RF (Wi-Fine) 433MHz communication with both DCU and UIU
● Event record
● Measurement
● STS token mode, currency prepaid mode and post-paid (traditional) mode
●STS operation

Three Phase STS Wi-Fine electricity meter  
D52A091

● Anti-tampering
● 8 Tariff
● RF (Wi-Fine) 433MHz communication with both DCU and UIU
● Event record
● Measurement
● STS token mode, currency prepaid mode and post-paid (traditional) mode
●STS operation

Customer Interface Unit(CIU)
X899005

●through CIU’s keypad to do the recharging or reading.
●CIU can reading data and check events of meter by sending short codes and update the display content.
●enter 20-digit token to do recharging for meter.
●CIU is powered by 4 pcs #7 batteries,  it is easy to replace batteries.
●Communication distance: 150m(open area)