≤75 ms Communication Refresh
Specified RS485 communication refresh time of ≤75 ms for applications requiring timely meter-side data updates.
DEM3K202 6 A Three-Phase CT-Operated DIN-Rail Energy Meter with RS485
DEM3K202 is a 3P DIN-rail, CT/PT-operated 3P3W (Aron) / 3P4W energy meter designed for high-precision energy monitoring through external current and voltage transformers. It supports RS485 communication with Modbus RTU and DL/T 645-2007 compatibility, a specified communication refresh time of ≤75 ms, switched tariff input and Class 0.5s active energy accuracy. CT ratios up to 2000:1 and PT ratios up to 350:1 are supported. The meter has no internal battery, RTC or TOU schedule.
CT/PT operated
3P3W (Aron) / 3P4W
MID Certified
MID
54 mm DIN-rail width
5(6) A CT input rating
2000:1 / 350:1 CT / PT max ratio
−40°C to +70°C Operating temperature
Product Highlights
Fast Data Refresh for CT-operated metering
Class 0.5s Active Energy Accuracy
Class 0.5s active-energy measurement in accordance with IEC 62053-21 supports high-precision energy monitoring through external CT/PT.
RS485 with Dual Protocol
Supports RS485 communication with Modbus RTU and DL/T 645-2007 compatibility, with configurable baud rates from 9.6 to 115.2 kbps and addresses from 1 to 247.
Flexible CT/PT Ratio Configuration
CT ratio up to 2000:1 and PT ratio up to 350:1. Maximum combined CT × PT ratio of 350000:1 supports a wide range of transformer configurations.
Switched Tariff Input
Supports switched tariff input for dual-tariff applications. DEM3K202 has no internal battery, RTC or TOU schedule.
Battery-Free Design
No internal battery, RTC or TOU schedule. Supports external switched tariff input only (two tariffs by default). Reduced component count simplifies long-term maintenance. For a battery-equipped TOU variant, see DEM3K302.
Applications
Applications and Selection Guidance
EV Charging Metering
Solutions for AC/DC charging, billing and charging platform integration.
Explore ApplicationSolar PV & ESS Metering
DC/PV monitoring for inverters, storage systems and distributed energy monitoring.
Explore ApplicationC&I Sub-Metering
Branch metering for buildings, factories, tenants and energy allocation.
Explore ApplicationData Center Energy Metering
Rack, cabinet and distribution power monitoring for data center operations.
Explore ApplicationTechnical Specifications
Technical Specifications
| Connection type | CT / PT (external current and voltage transformers) |
| Wire system | 3P3W (Aron) / 3P4W |
| Rated voltage (Un) | 3 × 57.7/100–230/400 V (3P4W); 3 × 100–400 V (3P3W) |
| Voltage tolerance | 0.8 to 1.15 Un |
| Frequency | 50/60 Hz |
| Current connection | CT (external current transformer) |
| Basic current (Ib) | 5 A |
| Minimum current (Imin) | 0.05 A |
| Maximum current (Imax) | 6 A |
| CT ratio | Up to 2000:1 |
| PT ratio | Up to 350:1 |
| CT × PT ratio (max) | 350000:1 |
| Power consumption | ≤2 W / 10 VA |
| Pulse constant | 10000 imp/kWh |
| Voltage accuracy | ±0.5 % |
| Current accuracy | ±0.5 % |
| Frequency accuracy | ±0.5 % |
| Active power accuracy | ±0.5 % |
| Reactive power accuracy | ±1 % |
| Active energy accuracy | Class 0.5s |
| Reactive energy accuracy | Class 1 |
| Communication interface | RS485 |
| Protocol | Modbus RTU and DL/T 645-2007 |
| Communication type | Bidirectional |
| Communication address | 1 to 247 |
| Baud rate | 9.6 / 19.2 / 38.4 / 57.6 / 115.2 kbps |
| Parity | None / Odd / Even |
| Specified communication refresh time | ≤75 ms |
| Display and controls | Backlit LCD, 500 ms refresh, page navigation and setting buttons |
| LED indicator | Red pulse LED |
| Metering functions | Energy, power, power factor and harmonic monitoring |
| Energy calculation | Forward, reverse, absolute-value, algebraic-sum and net-energy modes |
| Tariff function | External switched tariff input; default two tariffs |
| Diagnostics and alarms | EEP self-diagnostics and configurable monitoring alarms |
| Other functions | Local firmware upgrade, wiring check, screen saver, page filter and runtime-hour counter |
| Operating temperature | −40°C to +70°C |
| Ingress protection | IP20; install in an IP54 outdoor or IP51 indoor enclosure |
| Overvoltage category | OVC III |
| Protection class | Class II |
| Rated impulse withstand voltage | 6 kV |
| Applicable standards | IEC 62052-11:2020 / IEC 62053-21:2020 / EN 50470-3:2022 |
Structure & Dimensions
DEM3K202 Dimensions & Wiring
Dimensions
Wiring
FAQ
Product FAQ
What is DEM3K202?
DEM3K202 is a 3P DIN-rail, CT-operated 3P3W (Aron) / 3P4W energy meter rated up to 6 A. It supports RS485 with Modbus RTU and DL/T 645-2007, with a specified communication refresh time of ≤75 ms. It supports switched tariff operation.
What connection and wire system does DEM3K202 use?
DEM3K202 uses ct / pt voltage connection with 3P3W (Aron) / 3P4W wiring.
What is the maximum current of DEM3K202?
The maximum current (Imax) is 6 A.
What interface or output does DEM3K202 provide?
It supports two-way RS485 communication compatible with Modbus RTU and DL/T 645-2007.
What is the active energy accuracy?
The active energy accuracy is Class 0.5S.
What tariff functions does DEM3K202 provide?
External switched tariff input with two tariffs by default. No battery, RTC or TOU. For a TOU variant, see DEM3K302.
Product Downloads
Product Datasheet Download
Datasheet
DEM3K Series Product Datasheet
Official DEM3K series datasheet covering product overview, specifications, wiring and dimensions.
Download PDF- Product overview and features
- Technical specifications
- Wiring diagrams and dimensions
Need a Smart Metering Solution for Your Project?
Tell us your requirements and our team will provide a professional solution and quotation within 24 hours.
Quick ResponseReply within 24 hours
Expert SupportEngineer-to-engineer
Custom SolutionsProject-ready from spec
Long-term PartnerSingle point of contact
